Zeal zesuper paramount SAE 40 SJ.CF is monograde Petrol engine oils formulated with high quality base stocks and selected additives to ensure optimum performance and protection for diesel engines requiring an API SL-/CF specification. Suitable for heavy duty, high output petrol engines where monograde oils are specified. It provides excellent protection in engines, against high temperature piston deposits, wear, corrosion and foaming under severe operating conditions.
Product Description & Specifications
Features & Benefits
• Excellent resistance to shearing at extreme operating conditions and retains its lubrication film.
• Good oxidation & thermal stability reduces sludge build up and keeps the engine cleaner.
• Outstanding wear protection to extend engine efficiency and service life.
• Reduced oil consumption at high operating engine temperatures.
• Improved resistance to deposit formation keeps engine clean to give your vehicle maximum power under extreme operating conditions.
• Optimum TBN reserves provide improved acid neutralization and corrosion protection, especially in old heavy duty diesel engines.
Specifications
Zeal ZeSuper Paramount SAE 40 API SJ meets or exceeds following International and Builder specifications:
- API SJ CF, CD-2, CD, SF, SG
- ACEA E2
- MTU OIL Category-1
- MAN 270/271
- MB 228.0/1
- Volvo VDS
- Caterpillar TO-2
- Deutz DQC –I-05
- Allison C3 (SAE: 30)
- Detroit Diesel 7SE-270
Application
Zeal ZeSuper Paramount SAE 40 API SJ is suitable for use in following:
- Suitable for use in heavy duty 2-stroke & 4-stroke turbocharged and naturally aspirated diesel engines.
- It can be used in both On-highway light and heavy duty trucks & construction and mining equipment, where high or low sulfur diesel is used.
- Suitable for certain stationary equipment, such as pumps that run continuously under steady state conditions.
Typical Characteristics
| Zeal ZeSuper Paramount | Test Method | Units | SAE 40 SJ |
|---|---|---|---|
| Density @ 15 0C | ASTM D 4052 | gm/cc | 0.8930 |
| Viscosity @ 100 0C | ASTM D 445 | cSt | 15.4 |
| Viscosity @ 40 0C | ASTM D 445 | cSt | 158 |
| Viscosity Index | ASTM D 2270 | – | 99 |
| Pour Point | ASTM D 97 | °C | -18 |
| Flash Point (COC) | ASTM D 92 | °C | 236 |
| Total Base Number | ASTM D 2896 | mg KOH/g | 6 |
| Phosphorous | ASTM D 4951 | % wt | 0.85 |
| CCS Viscosity | ASTM D 5293 | cP | 5600 @ -20 °C |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
